WTIM 8 + 600BE Injected Опции

[Gribas]

Тестирую на объекте DECT
LIK 300
MFIM/GS96M-5.5Ed AUG/11
Boot Version-1.0Bf MAY/10
Kernel Version-5.5Dd
H/W issue-2
WTIM8 GW 4.0Kc/(1.2Ad)

U-Boot 1.1.5 на WTIM 8
[ DECT Statistics ]
ws 20 stateview
WTIM Mode : MASTER
WTIM Version : 1.2Ad (FPGA 1.5)
Base 1 Version : 1.0Bd 1.0Bd (FPGA 1.2 1.2) [GDC-600BE]
Base 2 Version : 0.000 0.000 (FPGA 0.0 0.0)


Прошиваю Базовую станцию.

U-Boot 1.1.5 (Aug 31 2011 - 16:24:12)

CPU : Nios-II
SYSID : 9ced9d86, Thu Apr 01 02:49:23 2010
BOARD : WTIM
Init LIU - chip rev:0x01
Manufacturer: STMicroelectronics
Chip: M29W160EB
*** Warning - bad CRC, using default environment

Hit Ctrl-C or Ctrl-Break to stop autoboot: 0
WTIBE# <INTERRUPT>
WTIBE# run basedwn
## Error: "basedwn" not defined
WTIBE# run basedown
.........Linked BASE Info Searching.........
########### Link Connection Info ###########
Link 0 : is connected to GDC-600BE(new)
############################################

Link 0 : is connected. Base 0, Base 1 download start!!
Set Base#0 Download Mode
BASE0 Download Start - Buffer Start:0x003e0000 Len:0x10000
BootImage Download Progress:100%
Erase Progress....
AppImage Download Progress:100%
Set Base#0 Normal Mode
Base 0, Base 1 download end!!

WTIBE# reset


U-Boot 1.1.5 (Aug 31 2011 - 16:24:12)

CPU : Nios-II
SYSID : 9ced9d86, Thu Apr 01 02:49:23 2010
BOARD : WTIM
Init LIU - chip rev:0x01
Manufacturer: STMicroelectronics
Chip: M29W160EB
*** Warning - bad CRC, using default environment

Hit Ctrl-C or Ctrl-Break to stop autoboot: 0
Loading .exceptions @ 0x00800020 (424 bytes)
Loading .text @ 0x008001c8 (417808 bytes)
Loading .rodata @ 0x008661d8 (52316 bytes)
Loading .rwdata @ 0x00872e34 (18520 bytes)
Clearing .bss @ 0x0087768c (316948 bytes)
## Starting application at 0x008001c8 ...


=============================================
| WTIM S/W Running (for DECT Fixed Part) |
=============================================

FTDPS LLME V1.0A / 1999.09.02
FTDPS NWK V1.0A / 1998.08.10
FTDPS DLC V1.0A / 1998.04.07
FTDPS MAC V1.0A / 1999.04.22
FTDPS LMAC V1.0A / 2006.05.12
FTDPS COMM V1.0A / 1998.04.08
IP-DECT S/W Version GS95U-1.2Ad (Date=2011.12.12)
HBUS Initialize!!
WBUS Initialize!!
[MAIN] One base reset mode
NoOfWtim=01
Mode check ok!!
Node[00].Address=01
Node[01].Address=ff
Node[02].Address=ff
PollTbl[00]=ff
PollTbl[01]=ff

INIT MASTER SLAVE 1

WTIM Mode : Master - 1
Nation : 0x7fff, 0x 0
FPGA LAW SEL Value : 0x0
Rcv WTU_SYS_INFO_CMD[0x29]
Registered Device Number :
Link[00] Injected
Lsync=01, Rsync=01, Los=00, Cv_is=00
[NORMAL] ALLBASE_RESET_OK
Send RESTART_CMD To Link[00] Slot[06]
Send RESTART_CMD To Link[00] Slot[06]
BMC_RESTART_REQ, Base[00]
BMC_RESTART_REQ, Base[01]
600BE Injected!!!!
BMC_STARTUP_CMD, Base[00]
BMC_STARTUP_CMD, Base[01]
LINE ATT : GDC-600BE BASE[00], ReadValue[12695], Modify[81]
MARM_ACTIVE_DUMMY, Link[00] Slot[08] Freq[07]
MARM_ACTIVE_DUMMY, Link[00] Slot[02] Freq[08]

[START] ALL_BASE_RESET_CHECK !!
Link[00] Ejected
Lsync=00, Rsync=00, Los=01, Cv_is=00
MARM_IDLE, Link[00] Slot[00]
MARM_IDLE, Link[00] Slot[06]

Link[00] Injected
Lsync=01, Rsync=01, Los=00, Cv_is=00
[NORMAL] ONE_BASE_RESET_FINISH
Send RESTART_CMD To Link[00] Slot[06]
Send RESTART_CMD To Link[00] Slot[06]
BMC_RESTART_REQ, Base[00]
BMC_RESTART_REQ, Base[01]
600BE Injected!!!!
BMC_STARTUP_CMD, Base[00]
BMC_STARTUP_CMD, Base[01]
LINE ATT : GDC-600BE BASE[00], ReadValue[12695], Modify[81]
MARM_ACTIVE_DUMMY, Link[00] Slot[04] Freq[08]
MARM_ACTIVE_DUMMY, Link[00] Slot[08] Freq[01]
Status Count All Clear!!

Но после обновления 600BE все равно 600BE Injected!!!!
и не могу зарегистрировать телефон, не вижу 600BE

+ при регистрации на web DECT, при использовании любого свободного номера выдает "инвалид номер"

[Dron]

А что с Park Code? Ввели?

[Gribas]

А что с Park Code? Ввели?

да, его ввел.
Park Code + AC Code введены.

Телефон который нашел для теста Siemens SL1. c LDK он работал на 100%