Добрый день Уважаемые гуру.
На сайте "лежит" прошивка GS55MB5Cf. Это новая версия для АТС? Сейчас установлена 2.5Bd MAR/14
Есть какие-нибудь изменения заметные для пользователя?

http://www.artcom.ru/forum/index.php?showtopic=11559

"Problem
When the Registration User ID has a domain name, the MG system sends the wrong URI to server.(the '@' is contained twice)

Now
It is fixed."




"Problem
Sometimes, a mute problem was occurred between SIP terminal and CO/STA.
SIP terminal can talk with CO through VOIB channel.
When SIP terminal disconnected with abnormal case, MG did not stop tone on VOIB channel. It made mute problem.

Now
It is fixed"
"Before
The range of port number for SIP signaling is fixed from 1024 to 65535(PGM 370).

Now
It is extended from 0 to 65535."
"Problem
When the MG system negotiates the codec with the SIP UA, the MG sends 711A, 711U ordering. If the UA responses the codec information with ordering 711A, 711U, the MG system opens RTP with 711U not 711A.
Because the MG system checks 711U first than other codecs.

Now
It was fixed.(Sending order was changed to 711U, 711A)."
"Before
- System provides transferor information when a transferred call is camped on busy station.

Now
- System provides original caller informaiton to transferred station when transferred call is camped on busy station."
"Before
If station receive more than 2 call, it may stop ringing when second call is disconnected

Now
This is fixed."




"Before
It was applied when CO call is routed to CO directly.

Now
It is applied when station make CO to CO transfer/ Offnet Call Forward"
"Problem
If a user dials digits within first DTMF delay timer, this timer was re-assigned without sending first digit.

Now
It was fixed"
"Problem
A user cannot upload system greeting for AAFU. (in case wave file format has ext data)

Now
It was fixed"
"Problem
If a SIP terminal is located in branch office which is connectd through VPN, the call from/to the SIP extension is muted.

Now
It is fixed. PGM 381 [Within Same Firewall with the System] is added."



"Before
CO Flash feature was opreated with CO flash feature code on flex button.

Now
It can be operated with Flash key on terminal"
"Problem
When a user press CO button B after he press CO button A, system did not disconnect CO A.

Now
It is fixed"
"Problem
When AME is set to SPEAKER&HEARING, there is no sound during call is routed to VM.

Now
It is fixed"
"Problem
MG doesn't receive the SIP inbound calls. To resolve this problem, the system have to be rebooted.

Now
It is fixed"
"Problem
When PGM 371 DTMF Send Mode is RFC2833, the MG-VOIB can change the payload of DTMF and sends it.
In VOIB, maint> dtmfpt set XXX (XXX : payload, default 101)

Now
It is fixed"
"Problem
According to PGM 161 Index 10 [VOIP FW Usage], the contact address for incoming SIP trunk calls use Firewall IP addres or system IP address.
(For media information in SDP, the system checks the PGM 373 Firewall Routing --> Not changed)

Now
It is fixed"


"Before
Even if the session timer is OFF, this Session-Expires header is added in message.

Now
It is fixed."
"Before
MG system doesn't support Resource-Priority.

Now
It is added."


"Problem
There was found following problem: the Command Conference Groups do not work in MG300 ver. 2.5Bd and later.
While making a call to the assigned Command Conf Group the system restarts.
Conditions:
- MG300 ver. 2.5Bd or B.5Cd
- DSIU is installed on MPB
- in PGM206 STA 100, 105, 111 (all stations belongs to DSIU) are assigned to Command Conf Group 1.
- all those stations 100, 105, 111 have allowance for access to Command Conf Group 1
- make a call to Command Conf Group 1 by dialing a code *58001
- all stations of the group are ringing, but there is no any reaction if user goes Off-Hook or for presses any buttons.
- And the system itself goes to restart
It was found that there is no any problem in previous s/w version like 2.1Ac
Also it was found that the problem is appeared only in MG300 ver. 2.5Bd and later, but MG100 normally works with 2.5Bd.

Now
It is fixed."
"Before
When CO service mode(PGM161-1) is SIP, Video call could not be made with that CO line.

Now
It is fixed."

Основные изменения коснулись проблем на MG300? Я правильно понял Google-перевод?

На 300-й были проблемы с группами конференций. Остальные изменения касаются и 100 и 300

Спасибо. Наверно попробую прошить.

Решилась ли проблема с передачей паузы в потоке?

Да, на версии B[2].1Cb, 28 Feb 2014. Но, к сожалению, не всех возможных случаев.
И пока нет информации, были ли аналогичные исправления внесены в версию 2.5.

По моему на этой прошивке самопроизвольно ресетится атс. Откатывали назад клиенту.

На сайте появилась новая прошивка MG-MPB100 2.5Ci (GS55M25Ci).
Не подскажите, какие изменения в ней появились?

Description
"Problem
When a transfer call is camped on the station, a call is stayed the camped on the station.

Now
It will be routed to tranfering station after recall timer is expired"
"Problem
SIP Terminal user cannot receive any call after he dials wrong speed bin number.

Now
It is fixed"
"Problem
Fax receiving error through VOIU channel.

Now
It is fixed"
"Problem
Record file was not saved for IPCR On-Demand Record mode.

Now
It is fixed"



Description
"Problem
No answer forward was not operated for camp on call

Now
It is fixed
-. Forward Priority
1. Station Forward
2. Station Preset Forward "




Description
"Problem
Speed bin name was not saved in LIP8000.

Now
It is fixed"
"Problem
When the S0 receives the Release message prior to Disconnect message, the channel is not released.

Now
It is fixed"


Description

"Problem
When the call is received from the SIP phone with sendonly option in video attribute, there is the one-way mute problem.

Now
It is fixed"

Спасибо

Зависают порты (2-3) на плате LCOB12. mg300 версия GS56MB5Cf. На GS56M25Ci решена проблема зависаний, ребутов?